Back Home Product Range Applications Suppliers
 
 

You are here:  Polymar - Our Suppliers - Huntsman Polyurethanes (Morton) - Product Catalog - Configurations       

    

Product Range      
Charts  
Catalogue     
Configurations     

   

 

 

 

  
 
   
 
      
     (Click on the product number to view data sheet)
 
Physical Property Method Product Range
  PE-192 PE-193 PE-393 PE-399 PE-499 PE-409 PE-419 PE-429 PE-500 PE-501
Shore Hardness A ASTM D-2240 76 74 74 80 65 70 70 70 95 95
Tensile Strength ASTM D-412 4000 3000 3000 6500 3500 3100 4100 4000 6500 6500
Ultimate Elongation ASTM D-412 550 600 600 500 850 600 550 440 350 350
100% Tensile Modulus ASTM D-412 900 400 400 300 250 330 300 280 1800 1800
300% Tensile Modulus ASTM D-412 1800 800 800 1000 400 740 1000 1220 5300 5300
Tear Strength ASTM D-624 450 370 300 210 225 250 200 165 580 580
Specific Gravity ASTM D-792 1.06 1.05 1.05 1.07 1.07 1.04 1.04 1.04 1.07 1.07
TMA Peak °C Huntsman TMA 112 101 107 120 93 103 97 97 112 145
TMA Range °C Huntsman TMA 95 to 121 80 to 110 85 to 125 80 to 145 80 to 128 85 to 120 80 to 130 85 to 125 87 to 130 110 to 175
DSC Mid Point Tg °C Huntsman TMA -38 -44 -44 -36 -49 -48 -56 -54 -28 -28
Suggested Laminating Temp °C 125 to 140 105 to 120 105 to 120 95 to 130 95 to 120 90 to 110 85 to 110 90 to 120 120 to 150 120 to 155
 
 
     (Click on the product number to view data sheet)
 
Desired Attribute Product Range
  PE-192 PE-193 PE-393 PE-399 PE-499 PE-409 PE-419 PE-429 PE-500 PE-501
Laminate in same cycle as PVB Best Good
Thick asymetrical laminates Good Best Best Good Good Best Good
Thin asymetrical laminates Good Best Good Best Good
Easiest to use overall Good Best Good
Can be used without vacumn bag Best
Hightest heat resistance Best Good
Best for ballistics Good Good Good
Best low temp impact resistance Best
Best adhesion to acrylic Best Best
Low modulus - make flat parts Good Best Good Best Better
Best adhesion at low laminating temp Good Good Best
Best cost / performance ratio Best
Replacement for A/G PVB Good Best
 
 
 
 

contact

Feedback

 

Polymer Marketing Specialists

Polymar bvba
Donksesteenweg 13 - B-2930 Brasschaat
Tel.: +32-(0)3-650.16.90  - Fax.: +32-(0)3-650.16.99
eMail :balemonte@polymar.com


Design ©1997-2000, Webdesign & eCommerce Technology by PIM - PubliNet Internet Marketing - Antwerpen - Belgium, Web Site Marketing by PIM
Feedback: info@publi.net

 Terms of Use